Specifications:
Auto Draw Or Power Button For Convenience
Compact Pocket Size: 53.6*44.3*121mm
Weight: 110.5g
Batter Capacity: 550mAh
LED Screen with Removable Magnetic Bottom
Cartridge Size: 14mm*68mm (Fits most 0.5ML ~ 2ML Carts)
Voltage Settings: 2.4V, 3.0V, 3.6V, 4.2V, The Green lights on the Right side of the Screen turn on gradually.
Preheating Function: 1.8V Preheat for 15 seconds.
Auto heat shut-off after 10 seconds of use for protection
Auto screen blanking after 5 seconds of no operation
30-minute Safety Shutoff
See Your Battery Level and Voltage All on the helmet
How To Use
-
Make sure that the bottom magnetic connector is properly connected to the bottom of the unit. The battery will not charge if the bottom connector is not attached.
-
Plug into a USB-C cable and connect to a power source, you will see the BLUE light flash when the battery is connected.
-
Please fully charge the battery before first use, the 4 lights will turn blue once charged, and disconnect the device from the power source before use.
-
Remove the bottom magnetic connector and firmly screw in the 510-threaded cartridge of your choice.
-
Insert the cartridge into the device and ensure that the bottom magnetic connector is properly reconnected.
-
If the device is powered off, press the power button 5 times to turn it on.
-
Press the bottom button 3 times or auto inhale 3 times to change voltage.
-
Auto Inhale on the mouthpiece two times to activate pre-heat, or you can also press the bottom button two times to activate preheat. The preheat time will last 15 seconds @ 1.8V voltage, then will switch to your previously selected voltage.
-
Simply pull from the mouthpiece or push the button to activate the cartridge.
